LaserShield® Wireless Detection Unit

You can add extra protection to your home or business. With additional LaserShield® Wireless Detection Units you can protect all areas in your home and business. The Wireless Detection Units communicate with the Master Alarm Unit via wireless radio signals and have a range of 150 feet (without obstructions).

Wireless Communication
The Wireless Detection Units' use a wireless Radio Frequency (RF) to communicate with the Master Alarm Unit.

Panic button
On the top of every Wireless Detection Unit is a large red button that functions the same as the one on the Master Alarm Unit. Pressing the panic button will immediately transmit a wireless signal to the LaserShield® Master Alarm Unit and an alarm will be activated, notifying the 24/7 Rapid Response Monitoring Service.

Power connection
The Wireless Detection Unit requires a power connection only; there is no need for a phone line.

Bypass button
A bypass button and indicator light is located under the motion sensor on the front of the unit. This button enables the user to bypass a bedroom Wireless Detection Unit at night. A small amber light will flash indicating the unit is in bypass mode. The bypass button does not affect the function of the panic button.

Battery back up
The battery will provide up to 12 hours of back up power.

Pet Friendly
A unique Pet Shield instantly snaps into place on the front of the LaserShield® motion detector on the Wireless Detection Unit. The Pet Shield blocks portions of the motion sensor so your pet is less likely to trigger an alarm.